Hi Joel, At the top of this page:
http://www.tigertronics.com/sl_wirebm.htm#Elecraft they show how SignaLink numbers the RJ45 pins. So, if you match the wiring in the table for the K3 to the numbering scheme for their RJ45's you should be fine. 73, Byron N6NUL On Fri, Nov 18, 2011 at 3:44 PM, Joel Black <w4...@charter.net> wrote: > If anyone is using the SignaLink USB, can someone tell me the wiring to > the K3? > > I think I have rolled Line In and Line Out. > > Here's what I have: > > From the SignaLink RJ-45: > > Pin 1 -> SPKR goes to LINE IN (mono) on the K3 > Pin 2 -> GND > Pin 3 -> MIC goes to LINE OUT (stereo connection with tip and gnd only) > on the K3 > Pin 4 -> GND > Pin 5 -> PTT goes to PTT IN on the K3 > Pin 6 -> GND > > Please don't get into the argument about how I can just use the LINE > IN/LINE OUT and connect to my computer's soundcard. I am aware of > that. I have very specific and very good reasons for using the > SignaLink. I just need some help with the wiring. > > Thanks, > Joel - W4JBB > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- - Northern California Contest Club - CU in the 2012 Cal QSO Party 6-7 Oct 2012 - www.cqp.org ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
