Tim I run fldigi with my K3, no need for any interface, just sound card cables and RS232. The program is free from http://www.w1hkj.com/
You also need to download the "K3.xml" file (from the above page) and it works... You don't need the companion program "flrig" as the fldigi program itself reads the frequency and keys the K3 via RS232. 73 Dave, G4AON Trying to run my K3 on PSK31 in data A mode w a tigertronics USB interface and digipan software. The box connects to K3 via line in/out jacks and the rear panel PTT jack. All jumpers in interface are set correctly. When the software goes to TX, the interface box goes to TX, and the phono plug from the box that plugs into the K3 PTT jack goes to ground. The K3 however doesn't go into TX mode, unless you also key the hand mike. <SNIP> Tim N5IIT ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html