I have good results with n1mm too, with an older xp computer. Difficulties may be caused by internet activity (i don't use cluster in contests).
Vic Sent from my phone On Feb 14, 2012, at 5:36 PM, Randy Moore <[email protected]> wrote: > Maybe I'm just lucky (although other data indicates otherwise!), but I > operate N1MM in contests with my N1MM keyer speed set to 25-30 wpm (usually > 28 wpm) and have never detected a problem with it. I'm running Windows 7 > (64-bit) on a fairly new CPU, and that probably has a lot to do with it. > > 73, > Randy, KS4L > > On Tue, Feb 14, 2012 at 8:04 AM, Don Wilhelm <[email protected]> wrote: > >> Tim, >> >> If your keying speed is at 20 WPM or less you can likely get by without >> the Winkeyer, but Windows does not allow the logger application to have >> direct control of the serial port, so there will be some timing >> differences in the keying. At slower speeds it may not be noticeable, >> but as the speed increases, the timing becomes more critical - so use a >> WinKey to solve that problem. >> >> 73, >> Don W3FPR >> >> On 2/14/2012 8:26 AM, Timothy Urban wrote: >>> K3 operator used to work CW contests all manually with a paddle plugged >>> into K3 and a pad of paper, now would like to experiment with an >> integrated >>> logging setup where I use a logging program to both log and send cw. >>> >>> Trying to figure out the shortest line from here to there with least >> number >>> of software applications, cables, phantom com ports, etc. >>> >>> Can N1MM or other logging program be set up to use my computer's one >> RS232 >>> port to log using the vfo freq and to generate and send cw, or do I need >> a >>> separate winkeyer USB box? >>> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
