This happens when the K3 is receiving PTT from both the Signalink and the software at more or less the same time. Do what Rick WA6NHC suggested and just have HRD trigger send & receive via the K3 commands, *OR* have the Signalink do it via the PTT plug on the back of the K3, but NOT both.
73, Dave AH6TD On Feb 21, 2012, at 6:34 PM, Bryon wrote: > I've been using HRD and my SignaLink with an Icom radio. I recently upgrade > to a K3 and got everything hooked back up with the new cables. PTT > connector on the SignaLink cable is also hooked up to the rear panel. > > I send just find, PTT on the SignaLink comes on, the Radio TX light comes > on it sends the SignaLink PTT light goes off and the radio stays in TX. I > can then hit XMIT and it stops. > > Any suggestions? > > - - > Bryon > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
