Thanks, Byron, but I have already done this. No joy. The 1920x1080 is a 16:9 mode, so no cropping or stretching should be applied by the monitor. -Bruce, N1RX
-----Original Message----- From: Byron Servies [mailto:[email protected]] Sent: Thursday, March 22, 2012 6:22 PM To: Bruce Beford Cc: [email protected] Subject: Re: [Elecraft] P3SVGA 1920x1080 Hi, I would suggest checking your monitors settings to make sure it is not in a "full" compatibility mode (the names seem to change. It might be different for your monitor). That is, the monitor can expand a 4x3 image to fit the 16x9 HD image vertically and thus chop off parts of the image on the sides and eliminate the "black bar" problem. Just an idea, 73, Byron N6NUL On Thu, Mar 22, 2012 at 3:09 PM, Bruce Beford <[email protected]> wrote: > > I installed the P3SVGA board in my unit yesterday. On mine, it also does not > display properly in 1920x1080. I have an Acer H243H monitor. It natively > supports "Full HD", 1920x1080p. When I set the P3 SVGA output to 1920x1080, > the monitor confirms that it has switched to that resolution. However, the > P3 image appears to extend off the right of the screen. That is to say, the > full span to the right is not displayed. -- - Northern California Contest Club - CU in the 2012 Cal QSO Party 6-7 Oct 2012 - www.cqp.org ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
