Data A is the proper sub-mode for PSK31. Do you have your audio level set correctly? Compression should be zero, but Increase the audio until you see 4 bars illuminated with the 5th bar flickering on the ALC scale. Use the power knob to set the desired power level. With the K2, K3 and KX3, ignore the setup information that you often see on the web - the way Elecraft controls power is different.
73, Don W3FPR On 4/23/2012 8:53 PM, Gerald Manthey wrote: > Using K3. I'm using data a for mode. Is that maybe the problem? > On Apr 23, 2012 7:30 PM, "Matt Zilmer"<[email protected]> wrote: > >> Are you using PSK31 "normal" frequencies? You can find these at >> http://www.podxs070.com/common-psk31-operating-frequencies. >> There is a good explanation about why these common frequencies are >> best to use for trying to make PSK31 contacts. >> >> If you can't get anyone else by CQing, drop me a line at this email >> address and we'll set up a sked. >> >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
