Another thing too is that having P3VGA data on retards the terminal display with most characters dropped.
Watch both the k3 and terminal displays and you will see this. Turn P3SVGA data off and then you see terminal pick up every character shown on the K3 screen. So having P3SVGA data on at the moment in RTTY will mess you up using ether terminal or svga for RTTY qso's At least in FSK D . Adrian ... vk4tux On 5/08/2012 5:11, Adrian wrote: > Tested today not a good result , poor to unreadable print rec by other > stations and print on k3 was good whereas pring on svga screen was bad > for RX. I even reversed FSK pol in config, but it had been correct. the > other post regarding missing text was what I saw. I have not had one > successful qso on cw or rtty(FSK D) with P3SVGA data and keyboard. > > Return to terminal ( thanks for that option time delay on latest K3 > Utility too) returned good print both ways. > > Adrian ... vk4tux > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
