Ok now I have done as Eric said & I now have made a few qso's with the P3SVGA data & keyboard. More practice will help. I will comment further later.
Thanks again Eric as always. Adrian ... vk4tux On 5/08/2012 6:19, Eric Swartz WA6HHQ - Elecraft wrote: > Adrian, are you saying you are running the K3 Utility data display in > parallel with the SVGA data display at the same time? If so, that is what is > causing your problem. > > They can not both run at the same time as they will compete for data from the > K3, resulting in dropped characters. Run the SVGA Data mode in stand alone > mode and you should see a significant improvement. > > 73, > > Eric. WA6HHQ > www.elecraft.com > _..._ > > On Aug 4, 2012, at 10:49 PM, Adrian<[email protected]> wrote: > >> Another thing too is that having P3VGA data on retards the terminal >> display with most characters dropped. >> >> Watch both the k3 and terminal displays and you will see this. Turn >> P3SVGA data off and then you see terminal pick up every character shown >> on the K3 screen. >> >> So having P3SVGA data on at the moment in RTTY will mess you up using >> ether terminal or svga for RTTY qso's >> At least in FSK D . >> >> Adrian ... vk4tux ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
