MIC SEL command question
According to the manual I should be able to turn on and off the additional gain setting by tapping the "3" key. It no longer appears to work as I get N/A on the display. Is this no longer working with the production release of software? I need to try and lower the gain and I think its on the high position for the additional gain stage. Manual info below. Mic/line transmit audio source, mic gain range, and mic bias. Source selections: FP (front panel 8-pin MIC jack), RP (rear panel 3.5 mm MIC jack), and LINE IN (rear-panel LINE IN jack). Tap 1 to toggle between .Low and .High mic gain range for the selected mic. Tap 2 to turn mic BIAS on/off (turn on for electret mics). For the front-panel mic only, tap 3 to turn on an additional gain stage. Use this only with very low-output mics. An apostrophe will appear after the H, e.g. H’ . ~73 Don KD8NNU ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
