Thanks that was it!!!! ~73 Don KD8NNU
On Fri, Aug 10, 2012 at 10:04 PM, Howard Stephenson wrote: > Don, > It's a typo in the manual. > Tap 7 to turn on the additional gain stage for the front-panel mic. > > -- > ------ > 73's Howard Stephenson K6IA > Customer Support > ------ > > >> MIC SEL command question >> >> According to the manual I should be able to turn on and off the >> additional gain setting by tapping the "3" key. It no longer appears >> to >> work as I get N/A on the display. >> >> Is this no longer working with the production release of software? >> >> I need to try and lower the gain and I think its on the high position >> for the additional gain stage. >> >> Manual info below. >> >> Mic/line transmit audio source, mic gain range, and mic bias. Source >> selections: >> FP (front panel 8-pin MIC jack), RP (rear panel 3.5 mm MIC jack), and >> LINE IN >> (rear-panel LINE IN jack). Tap 1 to toggle between .Low and .High mic >> gain range >> for the selected mic. Tap 2 to turn mic BIAS on/off (turn on for >> electret mics). >> For the front-panel mic only, tap 3 to turn on an additional gain >> stage. >> Use this only >> with very low-output mics. An apostrophe will appear after the H, >> e.g. >> H’ . >> >> ~73 >> Don >> KD8NNU > > -- > ------ > 73's Howard Stephenson K6IA > Customer Support > ------ > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
