Don, It's a typo in the manual. Tap 7 to turn on the additional gain stage for the front-panel mic.
-- ------ 73's Howard Stephenson K6IA Customer Support ------ > MIC SEL command question > > According to the manual I should be able to turn on and off the > additional gain setting by tapping the "3" key. It no longer appears to > work as I get N/A on the display. > > Is this no longer working with the production release of software? > > I need to try and lower the gain and I think its on the high position > for the additional gain stage. > > Manual info below. > > Mic/line transmit audio source, mic gain range, and mic bias. Source > selections: > FP (front panel 8-pin MIC jack), RP (rear panel 3.5 mm MIC jack), and > LINE IN > (rear-panel LINE IN jack). Tap 1 to toggle between .Low and .High mic > gain range > for the selected mic. Tap 2 to turn mic BIAS on/off (turn on for > electret mics). > For the front-panel mic only, tap 3 to turn on an additional gain stage. > Use this only > with very low-output mics. An apostrophe will appear after the H, e.g. > H’ . > > ~73 > Don > KD8NNU -- ------ 73's Howard Stephenson K6IA Customer Support ------ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
