Hi,
i invested a bit of time to analyze the config-file ..
There are different information inside this file
- some are dedicated to a single device (calibration values,...) and should
never be shared
- some are interchangeable (settings, ... ) and could be shared, but had to
be rearranged dependant on the konfiguration of the K3
otherwise one could only share configurations between equal configured K3
- ...
One possible way would be to use a webpage to describe the configuration
(modules, settings, ...) and upload the config.
Each config would have to be separated into transverable peaces (by software
...)
Based on this peaces one could create a new config, or mix it with an existing
config.
This is technically possible but there is still a chance to 'scramble' your K3.
Maybe it would be better to use a software to control the K3, like a user in
front of the K3, to modify settings.
73 de Thomas, DM7TN (K3 #078)
-----Original-Nachricht-----
Von: Gary Gregory <[email protected]>
An: Richard Squire - HB9ANM <[email protected]>
Cc: [email protected]
Betreff: Re: [Elecraft] Transferring Configuration to another K3
Datum: Mon, 13 Aug 2012 12:09:08 +0200
*Richard,
Same here BUT it would be nice if we could "swap" K3 configurations so I
hope somebody figures it out.
I wanted to set up a 2nd K3 the same as mine for a new owner and so i was
forced to do it manually for every setting as the other op didn't have a
laptop either.
Gary
*
On 13 August 2012 19:49, Richard Squire - HB9ANM <[email protected]> wrote:
> Trying to transfer my configuration to my second K3, K3 Utility taught me
> this was not possible because serial numbers were not consistent... After
> four years using the K3, I still have a lot to learn :-)
>
> So I copied all the menus and Configs one by one, this took nearly an hour
> but my two K3's now have identical settings.
>
> I wonder whether anyone has found a way to "cheat" on the Utility to make
> it
> believe it's the same transceiver? Or what is the reason why this
> apparently
> is not allowed?
>
> I'm just curious...
>
> 73
> Richard - HB9ANM
>
>
>
>
> -----
> Richard - HB9ANM
> --
> View this message in context:
> http://elecraft.365791.n2.nabble.com/Transferring-Configuration-to-another-K3-tp7560979.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
--
*Gary*
*Start the day off slow, then taper off.........*
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
