The K3 stores input selection (mic - front | rear, or
line) and mic level/line level on a per mode and per
band basis. Have you set up the input and mic/line
levels correctly in DATA A/AFSK A on each band?
73,
... Joe, W4TV
On 9/4/2012 4:31 PM, Mike Sanders wrote:
> Well, Only days old here the new K3 is still challenging
> me. Lots of fun without doubt. Anyway I am running MMTTY
> and using AFSK in the data mode. Everything looks good
> but no output. I tried shifting to USB/LSB and output is as
> set on power control. Tones on monitor and another RX
> sound good as well. But again when in data mode I get
> no/very low output. Power is set at about 50W and I get
> that in USB. Any thoughts on what I am missing here?
> Thanks es 73, Mike
>
>
> Mike Sanders
> KØAZ
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
