Mike , What I am wondering now is how line in adj helped you, as when when I
suggested that you look at line in level earlier, you said you are using FP
front mike for input?
Adrian ... vk4tux
"Adrian, Thanks for the input. I got the Beta firmware, downloaded
set up and running so am good for the moment. Just cannot get
the output up on RTTY Data. I am using a front mount mic selection
but my mike goes to a rigblaster duo it does all this house keeping.
The radio keys up and goes into transmit. My set up for the Kwood
mike works in the rigblaster on all the other modes Digital etc. So
I have audio into the mic input from my computer through the
rigblaster on the other modes to the K3. Leave it to me to disable
something obsure. Thanks again es 73 for now.
Mike Sanders
KØAZ
-----Original Message-----
From: Adrian Fewster [mailto:[email protected]]
Sent: Tuesday, September 04, 2012 16:53 PM
To: [email protected]
Subject: RE: [Elecraft] K3 no power out on DATA
“comp is at zero. Line level was set up and adjusted
up some. I do not remember the level right now but I
did get to it. However I am set up for FP mic and have
it up all the way. Output on USB is good and very low
output on Data. Data sounds good in another receiver
and on monitor but no output to speak of. Thanks
Mike Sanders
KØAZ”
Mike , You are using a mic or front mic socket to bring in the audio from
the pc? Not using the line in on back of k3?"
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-no-power-out-on-DATA-tp7562151p7562158.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
