There will be some latency - so you have "double latency" - once through the KX3 and again through the panadapter software. That may or may not be troublesome. If so, the only cure is another soundcard and the cable to the headphone jack (and mic jack)
You will likely want to use that 2nd sound card (one for the panadapter the other for digital modes), because the KX3 has no provision for transmit using the I/Q signals - to transmit, one needs to inject the tones into the microphone jack, so just accept that fact and add the path from the headphone jack to the soundcard as well. The "listen through" is nice because it does provide a 2nd receiver function for CW and SSB modes, and the frequency separation can be greater than the KX3 dual watch limitations. 73, Don W3FPR On 9/16/2012 5:25 PM, F5LCI wrote: > Don, > Thanks again for your help. > I finally got the trick in the NaP3 setup : > I had a wrong option in "system output" till I saw there the help box > "listen through". > No more need of the analog audio cable (and all it carries) ? > - Not exactly for the moment, as the audio throughput is still different > from what I can hear with the KX3 loudspeaker. > Maybe I have to dig deeper.... > > 72 de FO/F5LCI > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
