I have s/n 3012, factory built. On a few occassions I have been told by a QSO partner that I am tuned a bit high. It has happened infrequently but I decided to check against WWV. Three questions: 1) is comparing to WWV a good method to confirm display accuracy? I used my P3 display to center the carrier at 2.5, 5.0, 10.0, 15.0 mHz. The centered carrier spike showed these offsets per WWV transmission; 2.500mHz centered at 2.499.962 5.000mHz centered at 4.999.972 10.000mHz centered at 9.999.984 15.000mHz centered at 14.999.995 2) If there is a better reference outside a lab, what is it? 3) And what is the procedure for correcting a frequency display error? I can't seem to find it in any of the manuals I have. Thanks!Jack - WE5ST ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
