Iain, I looked at the specs and I believe you have found a good one. This is an older VGA cable and the spec sheet shows as all pins straight through. If you are getting one, will you test and let us know?
73, Bill K9YEQ -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of iain macdonnell - N6ML Sent: Saturday, October 06, 2012 11:30 AM To: Richard Cc: [email protected] Subject: Re: [Elecraft] KAT500 + AUX Cable On Sat, Oct 6, 2012 at 3:09 AM, Richard <[email protected]> wrote: > Rich VE3KI wrote: > > "Wouldn't a single 15-pin to 15-pin DE-15 cable in addition to the > first KPAK3AUX cable set be sufficient?" > > NO! Do NOT use a 15 to 15 DE-15 with all wires connected! Or at your own risk... A cable with all 15 pins connected straight through (and not shorted to the shield, or anything else) should work fine as the second cable, from the KAT500 to the KPA500. 73, ~iain / N6ML ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
