Jim, can't say that I have noticed the problem you mention, in fact I was thinking the KX3 was handling close in strong stations better than my TS-590. I do have the roofing filters and also am tending to use bandwidths of 100-300Hz. There are a lot more key clicks, buzzing and general noise these days, my guess a lot is from incorrectly setup amplifiers/rigs with bad CW waveforms or both!
Colin - G8FRA/M5FRA m5fra.org.uk <http://www.m5fra.org.uk> ------ Original Message ------ From: jimk...@aol.com To: elecraft@mailman.qth.net Sent: 08/10/2012 18:46:09 Subject: [Elecraft] KX3 Filter Blow-By >A recent KX3 owner (# 1677), I've noticed hearing out of passband signals >from loud CW stations. I can hear such stations up to several KHz away. I >suspect the range is limited by the audio response of the system, including >my ears. Both sides of zero beat, though less so on the opposite side of >the zero beat. > >In the CA QSO Party this weekend, maybe the loudest 10% of the stations on >10 CW Saturday afternoon were leaking through. (I've heard the leakage on >other bands as well.) > >I don't have any roofing filters. (I figured any stations weak enough for >me to need the filter to hear, would never be able to hear me anyway). > >Is this normal, or is there some shielding or other issue affecting my >unit? (It is a kit version). > > >73 - Jim K8MR >______________________________________________________________ >Elecraft mailing list >Home: >http://mailman.qth.net/mailman/listinfo/elecraft >Help: >http://mailman.qth.net/mmfaq.htm >Post: mailto:Elecraft@mailman.qth.net > >This list hosted by: >http://www.qsl.net >Please help support this email list: >http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html