Hi Dick,
Just connected the USB adaptor to the serial lead on com 8, where it is,
and opened Winlog32 OK with full control.
Disconnected USB and plugged the serial lead into Com 1 and re-set the
programme to Com 1 and it will display the the frequency as I spin the
VFO, but I cannot control the K3 with the computer. I'm using the three
wires as specified in the manual. Pins 2, 3 & 5. Do I need to connect
the other two pins?
Haven't got any other serial devices I can try, but no reason to believe
the Com ports should be faulty.
73
John
On 14/10/2012 22:34, Dick Dievendorff wrote:
> Can another program find the K3 using your lead. serial port speed issue? Do
> Com1 and 2 work with any other devices? Are the com ports OK in the Windows
> device manager?
>
> Dick, K6KR
--
John Petters
www.traditional-jazz.com
Amateur Radio Station G3YPZ
--
John Petters
www.traditional-jazz.com
Amateur Radio Station G3YPZ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
