Mike, The KRX3 should have the same overall gain as the K3's main receiver.
Try going into BSET Mode to see if the preamp is turned on on the sub receiver. You can also adjust other sub-RX settings in BSET mode, including NB, NR, and filter bandwidth, all of which can affect gain. 73, Wayne N6KR On Oct 30, 2012, at 5:48 PM, Mike Reublin wrote: > The KRX3 is installed and working! Time was 5 1/2 hours including > configuration. Usual outstanding fit and instructions. > > I installed it to use the ATU for aux, and I put the BNC in if I > ever want to change. > > I have it set to use the SUB AF control as balance. > > FIrst impression listening to one station working up 1 on 30M: > The KRX3 has a noticeably lower volume. > > And I found out my speakers and headphones are opposite (left/right) > to each other...😥 > > Mike, NF4L > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
