Thanks Wayne. All the settings look good. With the balance knob fully clockwise, the sub is in the right ear. Turning CCW, the main starts to be heard at 3:30.
73, Mike NF4L On Oct 30, 2012, at 9:28 PM, Wayne Burdick <n...@elecraft.com> wrote: > Mike, > > The KRX3 should have the same overall gain as the K3's main receiver. > > Try going into BSET Mode to see if the preamp is turned on on the sub > receiver. You can also adjust other sub-RX settings in BSET mode, including > NB, NR, and filter bandwidth, all of which can affect gain. > > 73, > Wayne > N6KR > > On Oct 30, 2012, at 5:48 PM, Mike Reublin wrote: > >> The KRX3 is installed and working! Time was 5 1/2 hours including >> configuration. Usual outstanding fit and instructions. >> >> I installed it to use the ATU for aux, and I put the BNC in if I ever want >> to change. >> >> I have it set to use the SUB AF control as balance. >> >> FIrst impression listening to one station working up 1 on 30M: >> The KRX3 has a noticeably lower volume. >> >> And I found out my speakers and headphones are opposite (left/right) to each >> other...😥 >> >> Mike, NF4L >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
