I don't have any on the K3 ser#4580 either. Worst for me was an FT990 Chuck, KE9UW Lionel Trains, TCA, LCCA, LRRC aka Jack, BMW Motorcycles BMWMOA #224
________________________________________ From: elecraft-boun...@mailman.qth.net [elecraft-boun...@mailman.qth.net] on behalf of Barry Simpson [vk2bj...@gmail.com] Sent: Saturday, November 24, 2012 3:02 AM To: Scott Manthe Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] [K3] need help with hiss on ssb receive I have never heard any hiss whatsoever with my K3 (s/n 1397) either on speaker or headphones, CW or SSB and I am particularly sensitive to such things. My TS590 does have some very low level hiss which I can live with Ok and I had a TS480 which had quite pronounced hiss. The worst I have heard in recent years is the FT2000 which is one of the reasons I have never owned one. 73 Barry. VK2BJ Sent from my iPad On 24/11/2012, at 11:15, Scott Manthe <scott.man...@gmail.com> wrote: > I've heard of this problem, but have never actually heard the problem on my > K3, which has a serial number in the 3000 range. I'm sure you'll get numerous > replies offering suggestions. > > I'm curious, when you say you "hang out" on USB, does this mean you never > operate below 10 mHz? Or do you operate on USB even on 40, 80 and 160 meters? > Personally, I don't notice much difference in the frequency response on USB > and LSB, but that might be because I only operate USB on the bands above 10 > mHz. > > 73, > Scott, N9AA > > On 11/23/12 11:00 PM, Mike Rodgers wrote: >> I've been putting up with this hiss on receive for two years. Others have >> complained as well. It sounds like a rushing wind. Kinda like old cassette >> tape hiss. It's the dirty little secret no one wants to talk about and the >> first thing that comes up on other forums when you mention k3. The most >> common being "tiring to listen to. >> >> I think I've got it the best it can be but I'm looking for tips to make it >> better. >> It keeps me from listening wide. Any hi cut above 2400 starts to irritate me >> so that limits me to a width of 2.1! >> >> Others complain on LSB but to me it seems more noticeable on USB where I >> hang out. >> >> It's a two year old k3 #5047 running latest firmware (not the beta). >> It's not Agc related as its the same with agc off. >> >> I feel I have a very aggressive negative eq as follows. >> >> 0. 0. 0. -3. -3. -12. -12/16. -16 >> >> I love the rig except for this. I'm not planning to sell it but I would like >> to make it better if possible. >> Right now I'm stuck at a width of 2.1 because of this. Am I doomed to just >> get used to it? I can filter it out with a kenwood speaker with filters but >> that's really just doing the same as reducing hi cut or bandwidth. >> >> Any ideas welcomed. >> >> Thanks and 73 >> Mike R >> >> >> >> Play me some fiddle, but no stinkin' violin! >> >> Amateur/Ham Radio KE5GBC >> HF & Echolink mobile > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
