Exactly....I left out the part about the splitter. :) On 11/28/12, Pete Smith N4ZR <[email protected]> wrote: > Yep, you can do that. I have a magic-tee splitter that goes between RX > OUT and RX IN, so that I can switch my QS1R in and out. > > 73, Pete N4ZR > Check out the Reverse Beacon Network at > http://reversebeacon.net, > blog at reversebeacon.blogspot.com. > For spots, please go to your favorite > ARC V6 or VE7CC DX cluster node. > > On 11/28/2012 10:19 AM, Greg wrote: >> I must be crazy but I had an SDR-IQ connected to the RX OUT and used >> the rig control in the software connected to a VCP with LP Bridge and >> it worked fine. >> >> >> >> On 11/28/12, KQ8M <[email protected]> wrote: >>> Unfortunately no, it only decodes +/- 12kHz. In the setup you use SDR-IF >>> not >>> SDR-IQ so you can control the radio. The software is >>> limited to +/- 12. The author cannot/will not expand that. >>> >>> 73, >>> Tim Herrick, KQ8M >>> Charter Member North Coast Contesters >>> [email protected] >>> >>> AR-Cluster V6 kq8m.no-ip.org >>> User Ports: 23, 7373 with local skimmer, 7374 without local skimmer >>> Server Ports: V6 3607, V4 Active 3605, V4 Passive 3606 >>> >>> -----Original Message----- >>> From: [email protected] >>> [mailto:[email protected]] On Behalf Of Greg >>> Sent: Wednesday, November 28, 2012 12:38 AM >>> To: David Gilbert >>> Cc: [email protected] >>> Subject: Re: [Elecraft] CW Skimmer & K3 >>> >>> If you use an sdr-iq with the K3 CWS will decode up to 190 kHz I >>> believe. >>> >>> Greg >>> On Nov 27, 2012 9:33 PM, "David Gilbert" <[email protected]> >>> wrote: >>> >>>> CW Skimmer is indeed a pretty cool piece of software, but it doesn't >>>> work >>>> like that. Unless you also have some sort of SDR front end, all you'll >>>> be >>>> able to get with CW Skimmer is a display of the audio passband. For a >>>> display of stations outside that passband you need an additional piece >>>> of >>>> hardware that takes the IF out from the K3 and processes it so that it >>>> can >>>> be handled by your sound card and CW Skimmer. Even then, CW Skimmer >>>> has >>>> a >>>> limitation in "IF mode" that restricts what you see to something like >>>> +/- >>>> 12 KHz. >>>> >>>> Even if you decide to go with something else, there's a lot of good >>>> information on the LP-Pan website. >>>> >>>> Dave AB7E >>>> >>>> >>>> On 11/27/2012 10:19 PM, Gary Smith wrote: >>>> >>>>> I'm always curious to try a new software & I thought CW skimmer looks >>>>> interesting. I'm wondering if anyone here is using it with their K3 >>>>> and if so, what did you find was the best way to connect it to the >>>>> K3? >>>>> >>>>> I have both the internal Realtek soundcard built into the PC >>>>> motherboard and I have a E-MU USB soundcard which has XLR & 1/4" >>>>> inputs for left & right. There's optical & S/PDIF inputs as well but >>>>> the K3 doesn't have those outputs. >>>>> >>>>> Thanks, >>>>> >>>>> Gary >>>>> KA1J >>>>> ______________________________**______________________________**__ >>>>> Elecraft mailing list >>>>> Home: >>>>> http://mailman.qth.net/**mailman/listinfo/elecraft<http://mailman.qth.net/mailman/listinfo/elecraft> >>>>> Help: >>>>> http://mailman.qth.net/mmfaq.**htm<http://mailman.qth.net/mmfaq.htm> >>>>> Post: mailto:[email protected].**net <[email protected]> >>>>> >>>>> This list hosted by: http://www.qsl.net >>>>> Please help support this email list: http://www.qsl.net/donate.html >>>>> >>>>> >>>> ______________________________**______________________________**__ >>>> Elecraft mailing list >>>> Home: >>>> http://mailman.qth.net/**mailman/listinfo/elecraft<http://mailman.qth.net/mailman/listinfo/elecraft> >>>> Help: >>>> http://mailman.qth.net/mmfaq.**htm<http://mailman.qth.net/mmfaq.htm> >>>> Post: mailto:[email protected].**net <[email protected]> >>>> >>>> This list hosted by: http://www.qsl.net >>>> Please help support this email list: http://www.qsl.net/donate.html >>>> >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[email protected] >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> >>> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
