Bill...this has been suggested many times before. Don't hold your
breath......
On 1/5/2013 8:53 PM, Bill Clarke wrote:
I would like to see a remote tuning device (VFO control only) that can
be moved around the desk etc. It needs to be simple - such as an extra
VFO encoder mounted in a box and on a wire in parallel to the existing
VFO-B encoder. Elegant by simplicity - it could plug into a jack
installed on the bottom edge of the front panel (or simply a
5-conductor line brought out from VFO-B). I may be wrong, but I sure
don't look at this as rocket science - it is all mechanical and a
little soldering. It would only be active when VFO-B is selected. Any
comments?
Thanks,
Bill W2BLC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
--
73,
Gary K9GS
Greater Milwaukee DX Association: http://www.gmdxa.org
Society of Midwest Contesters: http://www.w9smc.com
CW Ops #1032 http://www.cwops.org
************************************************
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
