I would say that is a common sense approach to the issue. Fred/N0AZZ
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Don Wilhelm Sent: Sunday, January 27, 2013 8:09 PM To: [email protected] Subject: Re: [Elecraft] Post to the group Bill, While I agree with you in general, there are occasions when the nitty gritty details are not of interest to the group. For instance, if I begin to help someone with a problem that gets into detailed measurements, that no longer is of interest to everyone, so I take it off-list. I leave it up to the discretion of the person with the problem to post whatever is the final resolution to the reflector. That sometimes happens, but sometimes does not. So, as long as I feel it is of general interest, I will post to the group, but if it is an individual question, I will go off-list. 73, Don W3FPR On 1/27/2013 8:52 PM, Bill Clarke wrote: > Replies to posts should be to the group - NOT sent as private emails. > Private emails are not seen by the group, hence no one in the group > can learn anything or hear what is being said on a particular subject. > > Bill W2BLC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
