I took special care to ensure all case covers metal to metal connections were sanded free of paint. I also did my best to route internal coax cables near the K3 Synth unit modules in a way to prevent least problems. I also use a ferrite snap on cylinder with several wraps on the 12VDC P3 power cord.
So in my shack there is no radiated noise from the P3 that I can find. There are other noise sources, particularly my high efficiency gas furnace controller. Still fighting that one. -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-generates-noise-on-144-MHz-tp7569806p7569810.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html