Hello Bill, May I suggest you take video capture of which you see on your P3 and send it to [email protected] In the past, I encountered firmware bugs in my KX3 and found it very difficult to describe them in words for Elecraft to reproduce them. I eventually took a short video and sent it to elecraft. They solved the problem after a couple of firmware updates. Just don't give up and let elecraft know your problem. Please also keep the group informed of further development. I will be interested in knowing more.
TNX & 73, Johnny VR2XMC ________________________________ 寄件人︰ Bill Clarke <[email protected]> 收件人︰ [email protected] 傳送日期︰ 2013年02月28日 (週四) 10:13 AM 主題︰ Re: [Elecraft] P3 - spikes that never move Thought I should mention: This QTH is extremely quiet. The typical daytime background for 75 meters does not even move the S-meter. Of course I base on daytime conditions, as they are all local and not propagated in. This is a very quiet QTH - however, with the antenna disconnected: The spikes I see on 75 meters are S3 (below the operating frequency) and show up on the waterfall as well. I also have a wide peak (20 kcs approx.) which is above the operating frequency with a strength of S5 and is also on the waterfall. I get a similar display on 40 and 20 meters. Mode makes no difference. As the antenna is disconnected and I am seeing this on the display - I can only assume it is internally generated. Note that the spikes are not tunable. Bill W2BLC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
