The "SB" in the macro should be "SB1" to turn dual watch on, and "SB0" to turn it off. Did you try that?

I'll try it, too.

Wayne
N6KR


On Mar 3, 2013, at 4:48 AM, Jim Sheldon wrote:


If you come up with a working macro for this one, please make sure it gets posted to the reflector. I haven't been successful with it either. The split, up 2 on and off works just fine, but trying to get dual watch going under the same conditions here has met with the same failure you're reporting. Got tired of banging my head on it last night and ran off to work TX5K on 160.

Jim Sheldon - W0EB

Lee Hiers wrote:
OK, so I want to set the VFOs equal, go split, turn on Dual Watch,
and make VFO-B 1 kHz higher than VFO-A.  I would also like this to
toggle split and Dual Watch back off when invoked a second time
(the resulting VFO-B frequency at that point doesn't really matter).

This is what I tried initially:


SWT25;SWT25;SWH25;SB;UPB4;


and it works fine, except when activating the macro a second time,
it toggles off the split (good), but not the dual watch (bad).


So, I tried:


SWT25;SWT25;SWH25;MN140;UPB4;


and when I invoke this macro, instead of toggling the dual watch,
it brings up the FM deviation menu choice


So, I tried:


MN140;


by itself, and this brings up the Dual RX menu entry, but it
doesn't toggle - the VFO-A display says "OFF" and the radio stays
in the menu mode.


When I select the Dual RX in the menu and assign it to PF1 or PF2,
it toggles Dual Watch on and off, but it seems to be acting strange
when placed in a macro.


Am I missing something?



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to