I am simply taking the headphone audio output (not the I/Q output) and running it into Digipan or Fldigi. This radio is just the stock radio with no added KXFL3 filter. I just wanted to experiment with sound card audio on the KX3 and used the method that has worked with other radios.
I had not heard of the other demodulation scheme before. I guess I have some more reading to do. I will try the Data A mode. Thanks for the feedback, folks. Dana Browne AD5VC --- On Tue, 3/5/13, John Oppenheimer <[email protected]> wrote: > From: John Oppenheimer <[email protected]> > Subject: Re: [Elecraft] KX3 PBT on SSB > To: [email protected] > Date: Tuesday, March 5, 2013, 8:21 AM > Hi Dana, > > The 1500 Hz hole in SSB mode is an artifact of Weaver > Demodulation. > Looking at the KX3 Firmware Information document, MCU 00.77, > DSP 00.74, > 3-6-2012: IF the KXFL3 is installed, Weaver demodulation is > enabled when > HI-CUT is below 2.4 kHz. > > John KN5L > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
