Line out = norm
Hit the sub and audio now on the other channel as well
so the problem is in the sound card and which channel it
is using for RTTY etc.
Thanks will look at the computer, 73 Merv
On Sun, Mar 10, 2013 at 11:48 AM, Merv Schweigert <[email protected]> wrote:
Seems I have lost one channel on the line out of my K3.
I have been using it on RTTY for years and suddenly
there is no audio output on one channel of the line out.
Is there a setting I could have changed by accident or
did the line out audio go south?
changed cables etc and there is nothing at the rear jack
line out of the K3 on one channel.
If it's the right channel, that's normally only active when the Sub-RX
is on (unless CONFIG:LIN Out = PHOnES).
73,
~iain / N6ML
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
