Gene,
Just download the latest. The KX3 Utility will do it almost
"automagically".
Try it, and if the "click on" boxes in KX3 Utility are not intuitive to
you, ask and you will receive an answer.
73,
Don W3FPR
On 4/25/2013 8:19 PM, Eugene Balinski wrote:
All,
Quick question regarding SW updates for the KX3. I
will be starting the construction of mine in a few weeks
(already have it in the box in the shack).
When I update the SW do I have to download each and every
update in order, or can I just upload the latest revision
and get all of the previous updates ?
Thanks es 73,
Gene K1NR
On Thu, 25 Apr 2013 12:58:16 -0700
Wayne Burdick <[email protected]> wrote:
KX3 beta firmware rev 1.44 (with DSP rev 1.16) is now
available. See release notes below.
You'll need the KX3 Utility application to download and
install firmware. For full instructions on loading beta
releases, refer to our KX3 software page:
http://www.elecraft.com/KX3/KX3_software.htm
Wayne
N6KR
* * *
MCU 1.44 / DSP 1.16, 4-24-2013
* NOISE REDUCTION (NR) EASILY ADJUSTABLE: The overall
level of noise reduction can now be set using the knob
above the NR switch (AF/RF-SQL). When NR is turned on,
the present setting will be displayed on VFO B for about
2 seconds. To select a new setting, rotate the knob
before the display times out. The setting is independent
for CW and voice modes. Note: The range of this parameter
is 0-10, corresponding to the “mix” or “M” parameter of
the RX NR menu entry. See below.
* RX NR MENU ENTRY CHANGES: The RX NR menu entry can be
used to adjust all three NR parameters (B=beta, D=decay,
M=wet/dry mix). The M parameter now has a range of 0-10,
matching the range available when the knob above the NR
switch is used (see above). As before, all parameters can
be adjusted separately for CW and voice modes. In most
cases the factory default settings can be used for beta
and decay, and the mix adjusted for the desired overall
amount of NR using the knob (without using the menu). You
can also now reset all NR parameters to factory defaults
by holding CLR.
* DVR PLAY/REPEAT FIX: DVR play no longer drops messages.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list:
http://www.qsl.net/donate.html
---------------------------------------------------------------------
Web mail provided by NuNet, Inc. The Premier National provider.
http://www.nni.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
