Well it's up and working FB! It didn't go as smoothly as I thought however. I kept getting an intermittent problem. When I got it all put together and aligned the tuner wouldn't power on. I'd pull the plug and connect it together and it would fire up then I'd move it and it wouldn't come on. Then was just dead.... I was sure it had to be the cable or the DB9 connector. I sucked all the solder off the DB9 and soldered it (twice) I then pulled the cable apart and soldered it again. I swear I put that dang thing together 10 times or more. I just knew the connector had to be the problem. Then I started looking at all my solder joints and looked at the traces from the DB9 connector. One led to the an IC chip. That single pin was unsoldered. I soldered it and it's been rock solid. It only took 6 hours to find the problem! Now it's 2 AM but the thing works.
Thanks again for all the help. 73 Stan AE7UT -- View this message in context: http://elecraft.365791.n2.nabble.com/KAT100-project-removing-the-control-board-tp7573412p7573451.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
