Try this. Go to "Data A" mode. Set main menu "Mic Sel" to "Line In". Adjust the "Mic" control to set line in gain up.
David W4DES K3 #7409 On Jun 9, 2013, at 11:46 AM, Richard W Hemingway <[email protected]> wrote: > Hi, > > Mr K3 has arrived!!! So far everything has gone well, except one thing. I am > using a SignaLink USB, as I had one and used it on my formeer radio. I have > the new cord and jumper wire card installed. It is connected to the wire in, > wire out, and PTT on the radio and into the SL, thence into the computer. I > have changed Hamlib to K3 in the configure box. I received just fine, but > when I try to send it lights up the PTT light in the Sl and the TX light on > the K3, but no signal. The K3 mode is set on USB, but the same result on > Data> I know that I am doing something wrong. Helpl! > > Dick, N5XRD > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
