Mike,
Yes, you must go to the K3 menu setting for PTT-KEY and set it to match
the setting in your software.
73,
Don W3FPR
On 9/27/2013 1:43 AM, Michael Eberle wrote:
What software are people using for the JT65 mode? I would like to
possibly start tinkering with JT65 and have WSJT9 installed. There do
not seem to be any options for using CAT to key the K3. I see an
option for a PTT port and buttons for selecting DTR or RTS. I already
have an RS-232 cable from my computer to P3-K3 and would prefer not to
have to use a separate port for PTT (or to use VOX). I have tried
setting it to port 1 which is my CAT cable to the P3-K3, and tried
both RTS and DTR but neither one works. Is there a setting in the K3
that needs to be changed?
Just wondering if there is other software for JT65 with the option of
using CAT, or if I am missing something in the configuration.
Thanks,
MIke
KI0HA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
