It has worked so well that I haven't had the urge to make a new cable
to connect my SignaLink USB's keying output to the rig. YMMV
Signalink USB does not have a USB keying output - its PTT is derived
via VOX built into the device.
73,
... Joe, W4TV
On 9/27/2013 12:34 AM, Bill Frantz wrote:
I have been operating my K3 mostly in digital mode for about 3 years. I
use the VOX to key the rig. It has worked so well that I haven't had the
urge to make a new cable to connect my SignaLink USB's keying output to
the rig. YMMV
Note that all the digital modes I know of only vary the frequency of the
modulation and not the amplitude. If there are modes that vary the
amplitude, then separate keying my be needed.
Cheers - Bill, AE6JV
On 9/26/13 at 6:19 PM, [email protected] (Greg KA2COP) wrote:
As far as keying the transmit or PTT I'm not quite sure how this is
accomplished. I see there is a KUSB cable to connect the K3 to the
computer with FTDI chipset and drivers. Can PTT be handled by the USB
cable?
-------------------------------------------------------------------------
Bill Frantz | When it comes to the world | Periwinkle
(408)356-8506 | around us, is there any choice | 16345 Englewood Ave
www.pwpconsult.com | but to explore? - Lisa Randall | Los Gatos, CA 95032
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
