Jim,
Did you do the calibrations? Particularly the Synthesizer and Reference
Oscillator?
If not, try those first, and if you have already done that, try doing it
again.
73,
Don W3FPR
On 10/5/2013 1:15 PM, Jim Mornar wrote:
Hello,
I just completed assembly of my K3/100 with subrx and 2.8khz, 400hz and
250hz filters in each rcvr. Very impressive rig.
On the main rcvr, while tuning across the 40m band, I get a "dead spot"
about every 5khz, thats about 1/2 khz wide. I would say any signals are
attenuated at least 20 db. The interval varies from band to band. It seems
to do it on all bands to a varying degree. The problem does not show up on
the sub rcvr... any thoughts?
I was going to try and remove the sub rx and see if that has any affect.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
