Phil,
It is not in the KPA100 manual, but on page 25 of the KAT100 manual.
Look at the diagram.
Does your present cable have two 'tails' on it? If so, the tail you are
currently not using goes to the computer COM port.
The usual cable that is constructed for computer use with the KPA100 is
extended when the KAT100 is added - the connector with two cables coming
from it must connect to the KPA100.
73,
Don W3FPR
On 3/24/2014 5:06 PM, Phil Wheeler wrote:
My K2/100 and KAT100 are working fine with the specified cables, Don.
What is "the special cable to connect to the computer or a serial
adapter"? Is it documented in the KPA100 manual?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
