Ken,
I believe the radio will not take direct RS-232 input, but it needs TTL
levels derived from the RS-232 signals. I ordered a serial port
programming cable from Powerwerks and when it arrives, I can tell you
the relationship. In the meantime, I cut the USB end off the existing
cable and trashed the USB end.
Be careful what you buy since Prolific and FTDI have both updated their
drivers to detect the counterfeit chips.
73,
Don W3FPR
On 3/28/2014 9:19 AM, Kenneth A Christiansen wrote:
Hi Don and the group
Could you give us the information on which wires of the Wouxun cable go to
which pins on the DB9 connector so I can use the USB adaptor for my K3 to
program my hand held. I have only 3 computers all using Windows 8.1 and so far
a work around but haven't used it for a month so don't know if it is working
today or next time I need it. Please respond here on the reflector as I know
other people need this information just as I have for almost 2 years. If
possible it would be nice to use the KX3 USB adaptor also.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
