I just received the WXUSB cable from PowerWerx. I confirmed that there
is some electronics between pins 2 and 3 of the RS-232 connector and the
plugs.
The easy answer is to just order the serial cable and use whatever USB
to Serial adapter you may have that works.
Thanks Eric for tolerating this OT subject.
73,
Don W3FPR
On 3/28/2014 9:19 AM, Kenneth A Christiansen wrote:
Hi Don and the group
Could you give us the information on which wires of the Wouxun cable go to
which pins on the DB9 connector so I can use the USB adaptor for my K3 to
program my hand held. I have only 3 computers all using Windows 8.1 and so far
a work around but haven't used it for a month so don't know if it is working
today or next time I need it. Please respond here on the reflector as I know
other people need this information just as I have for almost 2 years. If
possible it would be nice to use the KX3 USB adaptor also.
Thank you and I know your answer will be appreciated.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
