And for the list record, I can report that the mods reported to the group by Robert, S57AW, work a treat. My TS-480 now talks seamlessly with the KRC2. Thanks again Robert!
73 Steve M0BPQ On 8 April 2014 11:52, Steve Bunting <[email protected]> wrote: > Hi everyone, > > > I have KRC2 band decoder that I used ages ago with my K2 - it still works > in that I can toggle bands when I hold the F1 button. I want to use it with > my remote TS-480 but the radio CAT isn't currently driving KRC2 at all and > I would like some advice on how to get it working, please. > > > Current set up: I have used the Kenwood jumper positions from the KRC2 > manual and have a straight through serial cable from rig to KRC2. I am > using 4800 baud (W7 and W8 in place) and the radio CAT works with my PC. > The KRC2 is certainly in operate mode and I have a 13.8V PSU attached > (stating the obvious!) > > > Questions: I suspect I need to apply the handshake jumper between W14 and > W17 for the TS-480? Does the position of W7 and W8 matter for 4800 baud? > I'm assuming the manual is correct. Can any 480/KRC2 users comment on > anything else I have missed? > > > > 73 > > Steve > > M0BPQ > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
