On 4/17/2014 23:02, Don Wilhelm wrote: > Bob, > > Does the same thing happen if you operate into a dummy load?
Ah Don W. , Perfect as ever! I put the Dummy-Load onto KAT500 ANT#3 and stepped through the bands, initiating a "Tune" on each. Then I transmitted Tx-Data mode and was able to get the 50 to 60 watts I was looking for: 160m through 10m. > If all is OK into a dummy load, then the K3 is OK, but you have > RF-in-the-shack issues to resolve - add current mode chokes to your > antenna feedlines. Off-Hand, can you, or anyone, suggest which ones might suffice for my RG213 coax? -- Bob KD7YZ AMSAT LM 0901 http://www.qrz.com/db/KD7YZ www.denstarfarm.us/LGD ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com