Don, My error I apologize, "AUDIO A" should be read as "DATA A" in my original post. My concern was the transmission mode used by the KX3 once FLDIG triggered a data transmission as it does not seem to stay in "DATA A" mode anymore, I will dig inside the Hamlib ... :-) Thank you your answers.
73, Adrien VE2AKS 2014-04-22 20:14 GMT-04:00 Don Wilhelm <[email protected]>: > Adrien, > > I am confused by your statement that you see "AUDIO A" on the LCD. > There is no "AUDIO A" mode and no characters on the LCD indicate that > information. Yes, there is a "DATA A" Data sub-mode that should be selected > for soundcard data modes (except for RTTY where "AFSK A" provides added > advantages for RTTY). > > For most soundcard data modes, you would want to use DATA A submode in USB. > RTTY normally uses LSB, but RTTY is best used in AFSK A data sub-mode. > > Your data mode software application and the KX3 default settings may be > "fighting each other". > > 73, > Don W3FPR > > > On 4/20/2014 4:18 PM, Adrien Dessemond wrote: >> >> Hi, >> >> >> I am trying to use a KX3 with FLDIGI to do some PSK31 QSO. The KX3 is >> connected to the computer via a serial cable and FLDIGI has been set >> up to use the hamlib ("K3/KX3 beta") and I manually put the KX3 in >> "DATA-A" mode: I can see "USB", "TX DATA" and "AUDIO-A" on the KX3's >> LCD. However whenever I transmit some data with FLDIGI, the "USB" >> indicator turns off. Is the rig still in AUDIO-A mode ("TX DATA" is >> still shown)? Else which transmission mode I am supposed to use in >> FLDIGI for that rig? PCKTUSB/PCKTLSB or simply USB/LSB? >> >> > -- Adrien Dessemond / VE2AKS ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
