I think most of those on the linuxham (or Win Fldigi) group would
recommend you use Flrig to control your radio when using Fldigi. There
is a version of Flrig for each of the three major OS's. I *do* suggest
you join one or the other group - linuxham for Linux and OS X, Win
Fldigi for windows.
I use Fldigi with Flrig with my K3. When I get a chance, I will get my
KX3 set up to run with Fldigi/Flrig, but it will be either Friday or
Saturday before I can do that. Either way, I use macros within Fldigi to
control the modes on my radio especially on MARS nets where phone and
digital are used on the same frequency. Receiving data is not a huge
deal in USB (phone) but I still prefer to use a macro to swap between
USB and DATA A. You do have to make sure you set the *correct* data mode.
73,
Joel - W4JBB
On 4/22/14, 8:28 PM, Don Wilhelm wrote:
You might want to try using RigCAT instead of HamLib - choose K3 if
KX3 is not available.
The only function necessary is PTT keying and the proper display of
frequency on the waterfall.
73,
Don W3FPR
On 4/22/2014 8:50 PM, Adrien Dessemond wrote:
Don,
My error I apologize, "AUDIO A" should be read as "DATA A" in my
original post. My concern was the transmission mode used by the KX3
once FLDIG triggered a data transmission as it does not seem to stay
in "DATA A" mode anymore, I will dig inside the Hamlib ... :-) Thank
you your answers.
73,
Adrien VE2AKS
2014-04-22 20:14 GMT-04:00 Don Wilhelm <w3...@embarqmail.com>:
Adrien,
I am confused by your statement that you see "AUDIO A" on the LCD.
There is no "AUDIO A" mode and no characters on the LCD indicate that
information. Yes, there is a "DATA A" Data sub-mode that should be
selected
for soundcard data modes (except for RTTY where "AFSK A" provides added
advantages for RTTY).
For most soundcard data modes, you would want to use DATA A submode
in USB.
RTTY normally uses LSB, but RTTY is best used in AFSK A data sub-mode.
Your data mode software application and the KX3 default settings may be
"fighting each other".
73,
Don W3FPR
On 4/20/2014 4:18 PM, Adrien Dessemond wrote:
Hi,
I am trying to use a KX3 with FLDIGI to do some PSK31 QSO. The KX3 is
connected to the computer via a serial cable and FLDIGI has been set
up to use the hamlib ("K3/KX3 beta") and I manually put the KX3 in
"DATA-A" mode: I can see "USB", "TX DATA" and "AUDIO-A" on the KX3's
LCD. However whenever I transmit some data with FLDIGI, the "USB"
indicator turns off. Is the rig still in AUDIO-A mode ("TX DATA" is
still shown)? Else which transmission mode I am supposed to use in
FLDIGI for that rig? PCKTUSB/PCKTLSB or simply USB/LSB?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w4...@charter.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
