Thanks Sam but that isn't it. I get the Sub RX audio just fine in the
headphones.
What I am missing is the Sub Rx on the right channel of the Line Out
jack on the back of the radio.
Buck
k4ia
K3# 101 KX3 #715
On 4/28/2014 10:57 PM, Sam Morgan wrote:
also you might have the sub set to AUX Antenna with no antenna on it?
hold RX ANT button and watch to see the vfo b window say MAIN
On 4/28/2014 9:54 PM, Sam Morgan wrote:
maybe you have the 2m module and were using RF/SQL for squelch?
page 37 of manual tells all the tricks
SUB AF gain normally sets the sub’s volume
level. Alternatively, SUB AF can be used as a
main/sub balance control (see CONFIG:SUB
AF). With stereo headphones or dual speakers,
you'll normally hear main on the left and sub on the
right. CONFIG:L-MIX-R selects various alternate
combinations of main/sub audio mixing.
CONFIG:SPKRS must be set to 2 if you use
stereo speakers; otherwise, set it to 1.
SUB RF gain normally sets the sub receiver’s
RF GAIN level. If this knob is assigned to main/sub
squelch (CONFIG:SQ MAIN), then RF gain for
main/sub is controlled by the main RF gain control.
hope that helps
On 4/28/2014 9:32 PM, K4ia via Elecraft wrote:
I am trying to set up the K3 Sub Rx audio to come out on the right Line
Out. I hear nothing on that side. The Main Audio is fine on the left
side.
I can't find anything about a setting that would control this. I
thought it would be automatic.
Can someone point me in the right direction please?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
