I use the exact same setup, K3, MH MKII keyer, sub RX set to main, headphones connected to front panel, all ok here. As someone stated, do make sure the sub is set to MAIN and NOT auxiliary.
Ken.. G0ORH Sent from my iPad > On 29 Apr 2014, at 13:22, K4ia via Elecraft <[email protected]> wrote: > > I played with that setting to no avail. I am going into a Microham KeyerII > which has a separate audio line for the Sub Rx. If I plug headphones into > the Line Out jack on the back of the K3, I hear signals on the left side but > nothing on the right so I am convinced it is the output from the K3 that is > missing, not an issue with the computer or MKII. > > > Buck > k4ia > K3# 101 KX3 #715 > >> On 4/29/2014 8:05 AM, Sam Morgan wrote: >> hmmm, what is your Line Out set to? >> mine is the recommended 010 >> also is the computer a desktop or laptop? >> >>> On 4/29/2014 6:47 AM, K4ia wrote: >>> Thanks Sam but that isn't it. I get the Sub RX audio just fine in the >>> headphones. >>> >>> What I am missing is the Sub Rx on the right channel of the Line Out >>> jack on the back of the radio. >>> >>> Buck >>> k4ia >>> K3# 101 KX3 #715 > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
