Buck,
Either plug known working computer speakers directly into the line out
jack or play some source into the input of the MicroHam KeyerII to make
certain it is working as you expect.
Often added devices do not behave as we expect them to. Check those out
before concluding the K3 is the problem.
73,
Don W3FPR
On 4/29/2014 8:22 AM, K4ia via Elecraft wrote:
I played with that setting to no avail. I am going into a Microham
KeyerII which has a separate audio line for the Sub Rx. If I plug
headphones into the Line Out jack on the back of the K3, I hear
signals on the left side but nothing on the right so I am convinced it
is the output from the K3 that is missing, not an issue with the
computer or MKII.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
