There should be no need to cut any notch in the KPA3 shield for the 2
meter antenna cable if the K144XV instructions are followed.
73,
Don W3FPR
On 5/3/2014 8:20 PM, Harry Yingst via Elecraft wrote:
I had to remove that standoff to get the shield out (and back in)
so I could cut a notch in the shield for the two meter antenna cable
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
