You are 100% correct That is why you should not install modules after a very long week
Thank you ________________________________ From: Don Wilhelm <[email protected]> To: [email protected] Sent: Saturday, May 3, 2014 8:35 PM Subject: Re: [Elecraft] K3 Kit Wisdom There should be no need to cut any notch in the KPA3 shield for the 2 meter antenna cable if the K144XV instructions are followed. 73, Don W3FPR On 5/3/2014 8:20 PM, Harry Yingst via Elecraft wrote: > I had to remove that standoff to get the shield out (and back in) > so I could cut a notch in the shield for the two meter antenna cable > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
