John, This may not be exactly the same, but here is how I have my K3 set up in N1MM....it should get you in the right ball park.
In N1MM Config, select Hardware. For Com 1, for rig, select 'None' and put check marks for Digital and for CW/Other. In Set, set DTR = CW and RTS = Always Off. For Com 2, for rig, select KX3 and in 'SET', use 38400/N/1 and for DTR and for RTS, set them for Always Off. Of course you can set any unused Com port, from 1 up to a max of 8. I use a single FITI USB to Serial converter specified as COM 2. I am assuming the keying for the KX3 is the same as for the K3. Hope this helps John. 73, Tom - W4BQF -----Original Message----- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John Lawrence via Elecraft Sent: Sunday, May 11, 2014 9:54 AM To: elecraft@mailman.qth.net Subject: [Elecraft] Keying oand sending CW on KX3 with N1MM I tried to get the KX3 to work with the latest rev level of N1MM and configured it per the instructions for one cable connection using just the USB to serial cable supplied to go between the radio and PC win7. The configuration talks ok at 38400bps with commands for changing bands, vfo frequency and mode but I get an error message saying no CW port has been selected. I'm running on COM 3. In reading through the help manual I some radios require cw keying via a separate keying line into the KX3 using the serial commands set. Anyone been through this with the KX3 and figured out how to run with only the USB to serial cable? Thanks John, W1QS ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to alderm...@windstream.net ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
