Bill -

Which revision of the manual? I don't see anything on p. 55 that relates. The 
menu caption might help.

73, Mike NF4L

On May 15, 2014, at 1:43 PM, Nr4c <[email protected]> wrote:

> Chk manual page 55 for details.  
> 
> Sent from my iPhone
> ...nr4c. bill
> 
> 
>> On May 15, 2014, at 12:12 PM, Edward R Cole <[email protected]> wrote:
>> 
>> I give up...didn't find any "Autoshift" in the menus of either the K3 or 
>> KX3.  Is this about some other radio?  Or is a feature of some early vs of 
>> firmware long gone?  I'll admit not updating the K3 lately (vs 4.81).
>> 
>> In doing frequency drift measurements I noted that Frequency seen in USB 
>> mode is different than what is seen in CW mode.  The shift appears to be 
>> that of the sidetone frequency which I have set to 550-Hz for performing the 
>> temperature compensation procedure on the KX3.
>> 
>> To hear the test signal in USB I have to retune the VFO if I switch from CW. 
>>  I have a good ear for tone frequency so am able to tune in the test signal 
>> in USB to match the CW sidetone frequency.  That requires moving the dial 
>> about 550 Hz.  If on the wrong sideband you will *not* hear it.
>> 
>> 73, Ed - KL7UW
>> 
>> ---------------------
>> From: Oliver Dr?se <[email protected]>
>> To: [email protected]
>> Subject: Re: [Elecraft] CW on SSB
>> Message-ID: <[email protected]>
>> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>> 
>> 
>> And enable auto-shift in the menu when switching from CW to SSB and vice
>> versa, otherwise you will still have to retune to get signal into the
>> passband again.
>> 
>> 73, Olli
>> 
>> Contest, DX & radio projects: http://www.dh8bqa.de
>> 
>> 73, Ed - KL7UW
>> http://www.kl7uw.com
>>   "Kits made by KL7UW"
>> Dubus Mag business:
>>   [email protected]
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[email protected]
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [email protected]
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [email protected]


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

Reply via email to